SC827 Chassis Manual PCI Slot Add-on Card Riser Shield Card Screw Riser Card Figure 5-16: Installing the Add-On Card Installing Add-on Cards Disconnect the power supply, lay the chassis on a flat surface, and open the 1. chassis cover. Pull out the motherboard node drawer from the chassis. 2. Pull open the add-on card slot clip in the rear of the motherboard node 3. drawer. Remove the PCI slot shield. 4. Place the add-on card into the motherboard node drawer. 5. Slide the add-on card into the rear riser card slot and fit the add-on card 6. bracket with the opening in the rear of the motherboard node drawer. Close the add-on card slot clip. 7. 5-16