Super Micro Computer, Inc. SC827 — Super Micro SC827 Chassis Manual PDF Download

Chapter 5: Chassis Setup and Maintenance 5-9 System Fans Four fans provide cooling for the chassis. These fans circulate air through the chas­ sis as a means of lowering the chassis internal temperature. The SC827 system fans are easy to change modules. There is no need to uninstall any other parts inside the system when replacing fans, and no tools are required for installation. Optional Fan Configurations The SC827H model chassis is designed so that the default configuration of the system is for each motherboard to control two fans. Each motherboard node in the chassis is connected to the backplane through the adapter card, mounted in the motherboard node drawer.

In the event that one of the motherboard drawers is removed, then the remaining motherboard will operate both fans. The SC827T model chassis has a default configuration with one fan wired directly to each motherboard. In the event that one of the motherboard drawers is removed, then the fan associated with that motherboard will not function until the drawer is replaced. If multiple controls are desired in the SC827T, an optional cable must be purchased separately to connect from the backplane to each motherboard node.

Fan Configurations Options SC827T Default Configuration Fan A wired directly to Node A Fan B wired directly to Node B Fan C wired directly to Node C SC827T Optional Hot-Swappable Configuration (Requires optional cable) Fan D wired directly to Node D Fans A and B connected to backplane, Fans A and B connected to backplane, backplane cabled to Nodes A and B SC827H Hot-Swappable Default Configuration backplane cabled to Nodes A and B Fans A and B connected to backplane, backplane connected to Node A and B by adapter card Fans C and D connected to backplane, backplane connected to Nodes A and B by adapter card 5-19