Supermicro SC835 — Installing 3.5" Hard Drives

Chapter 5: Chassis Setup 5-4 Installing Drives Each SC835 chassis provides carriers for eight 3.5" hard disk drives. There is also one optional slim DVD drive plus two 5.25" full height drive bays that can house additional hard disk drives or removable media drives. Installing 3.5" Hard Drives The drives are mounted in drive carriers to simplify their installation and removal from the chassis. SAS or enterprise-grade SATA is recommended. Removing the Hard Drive Carriers 1. Press the release button on the drive carrier. This extends the drive carrier handle. 2. Use the handle to pull the drive carrier out of the chassis. Release Buttons Figure 5-2. Removing the Hard Drive Carriers 5-3