Supermicro SC835 — Fan Jumper Settings

SC835 Chassis Manual *The buzzer sound indicates that a condition requiring immediate attention has occurred. 1. Hard drive failure The buzzer alarm is triggered by the following conditions: 2. Fan failure 3. System temperature over 45є Celsius. This backplane can use up to three fans. To utilize each fan, you must configure both jumpers as instructed below. Fan Jumper Settings C-8 Jumper Settings Jumper Jumper Settings Note JP35 1-2: Reset 2-3: No reset MG9072 chip reset Socket Settings Socket Socket Setting Note JP18 Connected to front panel Buzzer reset* Press once to disable buzzer Press twice to enable buzzer Fan Jumper Settings Jumper Jumper Settings Note JP61 1-2: With fan 2-3:

No fan FAN #1 select JP97 1-2: With fan 2-3: No fan FAN #1 select JP62 1-2: With fan 2-3: No fan FAN #2 select JP98 1-2: With fan 2-3: No fan FAN #2 select JP63 1-2: With fan 2-3: No fan FAN #3 select JP99 1-2: With fan 2-3: No fan FAN #3 select