SC835 Chassis Manual 5. Backplane Main Power Connectors The 4-pin connectors, designated JP10 and JP13 provide power to the backplane. See the table on the right for pin definitions. 6. Fan Connectors The 3-pin connectors, designated JP54, JP56, and JP60, provide power to the fans. See the table on the right for pin defini tions. 7. Activity LED Header The activity LED header, designated JP26, is used to indicate the activity status of each SAS drive. The Activity LED Header is located on the front panel. For the Activity LED Header to work properly, connect using a 10-pin LED cable. 8-15. SAS Ports The SAS ports are used to connect the SAS drive cables.
The eight ports are designated #0 - #7. Each port is also compatible with SATA drives. C-6 Backplane Main Power 4-Pin Connector Pin# Definition 1 +12V 2 and 3 Ground 4 +5V Fan Connectors\ Pin# Definition 1 Ground 2 +12V 3 Tachometer SAS Activity LED Header Pin Definitions Pin # Definition Pin # Definition 1 ACT IN#0 6 ACT IN#4 2 ACT IN#1 7 ACT IN#5 3 ACT IN#2 8 ACT IN#6 4 ACT IN#3 9 ACT IN#7 5 Ground 10 Empty