SC836 Chassis Manual Front Connector and Pin Definitions 1. Backplane Main Power Connectors The 4-pin connectors, designated PWR1, PWR2, PWR3 and PWR4, provide power to the backplane. See the table on the right for pin definitions. 2-3. SAS Connectors The primary and secondary sets of SAS connectors provide expander features including cascading and failover. 4-5. Expander Chips These primary and secondary expander chips allow the backplane to support dual ports, cascading, and failover. 6-10. I 2 C Connector, UART Connectors, SDB Connectors The I 2 C connector, the UART connectors, and the SDB connectors are for manu- facturing diagnostic purposes only. 11.
SMB Connector This header provides for a connection with an optional JBOD controller board. 12. OVERHEAT_FAIL2 Connector This header can be connected to an external overheat LED, if desired. C-44 Backplane Main Power 4-Pin Connector Pin# Definition 1 +12V 2 and 3 Ground 4 +5V