Appendix D: SC836B Added Features Appendix D SC836B Added Features With an optional drive kit (MCP-220-83605-0N), the SC836B chassis models can support two hot-swap drive bays located in the rear of the chassis. For information on which drives are compatible contact Supermicro's Technical Support department at www.supermicro.com. D-1 Identifying the Drive Kit Components The photograph below shows the components in the kit that are required to install hard drives into the rear of the chassis: 1 A 1 C 1 D 1 B Figure D-1. SC836B Rear Drive Kit (MCP-220-83605-0N) Rear Hard Drive KIt Components A. Hard drive cage with two 2.5” drive trays (MCP-220-00047-0B x2) B.
Hard drive cage backplane (BPN-SAS-510T) C. Four-pin power supply Y-cable (CBL-0234L) for hard drives D. Two SATA cables (CBL-0179L or CBL-0481L x2; cable CBL-0179L is shown in picture above) D-1