Supermicro SC836 — Appendix D SC836B Chassis Specifications

Appendix D: SC836B Added Features 6. Connect the 4-pin power supply Y-cable to the cage backplane. 7. Connect the two SATA cables to the SATA ports on the cage backplane. 1 8 Route Cables Here Figure D-4. Routing the Cables 8. Route the cables into the chassis bay and out through the rounded opening in the side of the hard drive bay on the inside of the chassis. 9. Insert the hard drive cage into the rear hard drive bay of the chassis and slide it all the way back, aligning the grooves in the bottom plate of the cage with the upright posts inside the bay. 9 Figure D-5. Installing the Drive Cage into the Rear Bay D-3