Supermicro SC836 — HDD

SC836 Chassis Manual 3-2 Control Panel Buttons The chassis includes two push-buttons that control power to the system. Power The main power switch is used to apply or remove power from the power supply to the server system. Turning off system power with this button removes the main power but keeps standby power supplied to the system. Therefore, you must unplug system before servicing. Reset The reset button is used to reboot the system. 3-3 Control Panel LEDs There are six LEDs that provide status information about the system. Power Indicates power is being supplied to the system power supply units. This LED should normally be illuminated when the system is operating.

HDD Indicates activity on the hard drive when flashing. 3-2