Appendix A: Chassis Cables A-2 SAS Cables Some compatible motherboards have varying types of SAS connectors. This section lists optional compatible cables. Note : For SAS2 or SAS3, see Appendix C. If your motherboard has only one SAS connector that the SAS cables must share, use one of the following cables. These cables must be purchased separately. Alternate SAS Cables Cable Name: SAS Cable Quantity: 1 Part #: CBL-0175L Alt. Name: "Big Four" Placement: Internal cable Description: This cable has one SFF-8484 (32-pin) connector on one end and four SAS connectors (7 pins each) at the other.
This cable connects from the host (motherboard or other controller) to the backplane SAS hard drive port. Cable Name: SAS Cable Quantity: 1 Part #: CBL-0116 Alt. Name: iPass or "Small Four" Placement: Internal cable Description: This cable has one iPass (SFF-8087/Mini-SAS) connector (36-pin) at one end and four SAS connectors on the opposite end. This cable connects from the host (motherboard or other controller) to the backplane SAS hard drive port. Cascading/JBOD SAS Cables Use the following cables when setting up a cascading or JBOD system. Cable Name: SAS Cable Quantity: varies by setup Part #: CBL-0167L Ports: Single Placement: Internal cable Description: Internal cable.
Connects the backplane to the host bus adapter or external port. Used in single port environments. A-3