Supermicro SC836 — C-5 BPN-SAS2-836EL Backplane

Appendix C Backplane Specifications 6. Fan Connectors The 4-pin connectors, designated FAN1 through FAN3, provide power to the fans. See the table on the right for pin definitions. 7. - 12. SAS Connectors The primary and secondary sets of SAS connectors provide expander features including cascading and failover. From right to left the ports are Primary 1, Primary 2, Primary 3 and Secondary 1, Secondary 2 and Secondary 3. Note that secondary SAS ports are not present on the BPN-SAS2- 836EL1 backplane. 13. - 14. UART Connectors The primary and secondary UART connectors are for manufacturer's diagnostic purposes only.

(The secondary UART connector is not present on the SAS2-836EL1 model backplane) 15. - 16. Debug Connectors The primary and secondary EXPDBG1 and EXPDBG2 connectors are for manufacturer's diagnostic purposes only. (The secondary EXPDBG2 connector is not present on the BPN-SAS2-836EL1 model backplane) 17. - 18. MDIO Connectors The primary and secondary MDIO1 and MDIO2 connectors are for Supermicro's internal use only. (The secondary MDIO2 connector is not present on the BPN-SAS2- 836EL1 model backplane) C-21 Fan Connectors Pin# Definition 1 Ground 2 +12V 3 Tachometer 4 NC