Super Micro Computer, Inc. SC846 Chassis Series — Super Micro SC846 Chassis User & Service Manual PDF

SC846 Chassis Manual C-12 Failover with RAID Cards and Multiple HBAs The SAS-836EL backplane may be configured for failover with multiple HBAs using either RAID controllers or HBAs to acheive failover protection. RAID Controllers: If RAID controllers are used, then the failover is accomplished through port failover on the same RAID card. HBAs : If multiple HBAs are used to achieve failover protection and load balancing, Linux MPIO software must be installed and correctly configured to perform the load balancing and failover tasks. SAS HBA Dual Host Bus Adapter In a Dual Host Bus Configuration, the backplane connects to two Host Bus Adapters (HBA).

SAS HBA WWN Port A Expander 1 Port B Expander 2 SEC_J2 SEC_J0 SEC_J1 PRI_J1 PRI_J2 PRI_J0 J17 Figure C-8: Dual HBA SAS HBA Dual Host Bus Adapter Failover If the expander or data path in Port A fails, the system automatically switches to Port B. This maintains a full connec- tion to all drives. SAS HBA WWN Port A Expander 1 Port B Expander 2 SEC_J2 SEC_J0 SEC_J1 PRI_J1 PRI_J2 PRI_J0 J17 Figure C-9: Dual HBA Failover IMPORTANT: For RAID controllers, redundancy is achieved through port failover. For multiple HBAs MPIO software is required to achieve failover protection. C-12