Super Micro Computer, Inc. SC846 Chassis Series — Super Micro SC846 Chassis User & Service Manual PDF

SC846 Chassis Manual Connecting an Internal Host Bus Adapter to the Backplane The following section lists the most common cables used to connect the Host Bus Adapter (HBA) to the backplane. WWN SEC_J2 SEC_J0 SEC_J1 PRI_J1 PRI_J2 PRI_J0 J17 HBA Figure C-11: Single Internal Host Bus Adapter WWN SEC_J2 SEC_J0 SEC_J1 PRI_J1 PRI_J2 PRI_J0 J17 HBA HBA Figure C-12: Dual Internal Host Bus Adapter IMPORTANT: See Section C-12 of this manual, Failover with RAID Cards and Multiple HBAs for important information on supported configurations. Supported Internal HBA Cables Use the following listed cables to create connections between the internal HBA and SAS-846EL backplane.

The cables required depend on the HBA connector. Cable Name: iPass TO 4-lane Part #: CBL-0117L Length: 46 cm (18 inches) Description: This cable has one SFF-8484 (32-pin) connector on one end and iPass (SFF-8087/Mini-SAS) connector (36-pin) at the other. This cable connects from the HBA to the SAS-846EL backplane. C-14