Super Micro Computer, Inc. SC846 Chassis Series — Super Micro SC846 Chassis User & Service Manual PDF

Appendix D: SAS2-846EL Backplane Specifications *The buzzer sound indicates that a condition requiring immediate attention has occurred. The buzzer alarm is triggered by the following conditions: 1. Hard drive failure 2. Fan failure 3. System temperature over 45є Celsius. D-7 General Jumper Settings Jumper Jumper Settings Note PRI MODE1 and 2 _ 2-3 Factory Setting Do not change SEC MODE1 and 2 _ 2-3 Factory Setting Do not change EXPDBG1 and 2 No jumper required Debug, SMC internal use only.

(EXPDBG2 not present on SAS2-846EL2) MDI01 and 02 No jumper required SMC internal use only UART P1 _ No jumper required Primary UART connector UART S1 _ No jumper required Secondary UART connector (Not present on SAS2-847E2) JP1 No jumper required Buzzer connector BUZZER ENB1 _ Open: Disabled (Default) Closed: Enabled Buzzer settings* ACTLED1 Open: Disabled (Default) Closed: Enabled Activity LED settings FAN MONITOR DIS- _ _ ABLE Open: Disabled (Default) Closed: Enabled Fan monitor LED settings Rear LEDs LED State Specification FANFAIL1 On Fan failure OVERHEATFAIL1 On Overheat/Drive Failure LED Indicator (Red light: flashing, buzzer: on)