Chapter 4: Chassis Setup and Maintenance 4-7 Installing the Air Shroud Figure 4-13. Air Shroud for SC846LP Chassis Air shrouds concentrate airflow to maximize fan efficiency. The SC846 chassis air shroud does not require screws to set up. Installing the Air Shroud 1. Power down the system as described in section 4-2 and remove the cover as described in Section 4-1. 2. Confirm that your air shroud matches your chassis model. Each shroud is labeled SC846LP, SC846RC, or SC846U. 3. Disconnect the power supply, lay the chassis on a flat surface, and open the chassis cover. 4. Place air shroud in the chassis. The air shroud fits behind the two fans closest to the power supply. 4-11