Chapter 4: Chassis Setup and Maintenance 4-9 System Fans Five heavy-duty system fans (three front fans and two rear fans) provide cooling for the chassis. These fans circulate air through the chassis as a means of lowering the chassis internal temperature. Release Tab Release Tab Figure 4-14. Front System Fan Figure 4-15. Rear System Fan Replacing a System Fan 1. If necessary, open the chassis while the power is running to determine which fan has failed. (Never run the server for an extended period of time with the chassis open.) 2. Power down the system as described in section 4-2, lay the chassis on a flat surface, and open the chassis cover. 3.
Remove the failed fan's power cord from the serverboard. 4. Press the fan release tab to lift the failed fan from the chassis and pull it completely from the chassis. 5. Place the new fan into the vacant space in the housing while making sure the arrows on the top of the fan (indicating air direction) point in the same direction as the arrows on the other fans. 6. Power up the system and check that the fan is working properly before replacing the chassis cover. 4-13