Chapter 4: Chassis Setup and Maintenance 4-11 Changing the Power Distributor The power distributor provides failover and power supply redundancy. In the unlikely event that you must change the power distributor, do following: Changing the Power Distributor Power down the system, disconnect the power cords from the back of the power supplies, lay the chassis on a flat surface, and open the chassis cover. 1. Remove all cable connections to the power supplies from the motherboard, backplane, and other components. Also, remove both power supplies. 2. Locate the power distributor between the power supply and the fan row.
Power Distributor Cover Power Supply Power Distributor Board (Mounted in the tray on the chassis wall) Fan Row Figure 4-20. Removing the Power Distributor Cover 4-17