Super Micro Computer, Inc. SC846 Chassis Series — Super Micro SC846 Chassis User & Service Manual PDF

Chapter 4: Chassis Setup and Maintenance 10. Place the DVD assembly into the chassis, positioning it so that the bottom bracket is against the interior wall of the power supply bay and the front of the DVD drive is accessible through the opening of the rear DVD bay. 11. Align the mounting holes in the DVD with those in the interior wall of the power supply bay and those on the exterior at the rear of the chassis between the DVD bay and the power supply bay. Secure the DVD assembly to the chassis using two screws on the interior wall, and two screws on the rear of the chassis 12. Connect the SATA cable to the SATA port on the backplane. 4-25