Super Micro Computer, Inc. SC846 Chassis Series — Super Micro SC846 Chassis User & Service Manual PDF

SC846 Chassis Manual 4-13 Accessing the Backplane The chassis backplane is located behind the hard drives and in front of the front system fans. In order to change jumper settings on the backplane, it may be necessary to remove the backplane from the chassis. Removing the Backplane 1. Power down the system, remove the power cords from the back of the power supplies and remove the chassis cover. 2. Disconnect the cabling to the backplane. 3. On the right side of the chassis, remove the two screws that secure the backplane bracket and set these aside for later use. 4. Remove the four upper screws securing backplane housing to the chassis and set these aside for later use.

Remove Screws Remove the Four Upper Screws 3 4 Figure 4-36. Removing the Upper Backplane Housing Screws 4-30