SC846 Chassis Manual 5-4 Procedure for Rack Mounting This section provides information on installing a 4U chassis into a rack unit with the rails provided. There are a variety of rack units on the market, so the assembly procedure may differ slightly. Also refer to the installation instructions for your rack unit. Note: This rail will fit a rack between 26.5"and 36.4" deep. Identifying the Inner Rack Rails The chassis package includes one pair of rack rail assemblies in the rack mounting kit. Each assembly consists of an inner rail that secures to the chassis and an outer rail that is attached directly to the rack. The inner rails are etched with "L" (Left side) and "R" (Right side).
Inner Rail Assembly Figure 5-1. Identifying the Rack Rails 5-4