SC846X Chassis Manual 1-3 Components Drives The chassis supports twenty-four hot-swap 3.5" SAS or SATA hard disk drives in the front. The drives are supported by a backplane. In addition, you have the option to add up to six drives at the rear of the chassis. That can be some combination of: Two 2.5" hot-swap drives One to three fixed 3.5" internal hard drives One to six fixed 2.5" internal hard drives Power Supply The chassis features two 1280W redundant high-efficiency digital power supplies with PMBus 1.2 and 80 Plus Platimum level certification. It also can accomodate two optional battery backup power (BBP) modules.
Cooling The chassis includes four 92 mm heavy-duty, hot-swap fans and one 80 mm exhaust fan. System fans are powered and controlled by 4-pin connectors. An air shroud helps channel cooling air where needed. Expansion Slots The chassis supports up to thirteen PCI-E expansion cards. The total expansion card capacity may be less depending on the motherboard. Motherboard The chassis supports serverboards up to 15.2” x 13.2", including E-ATX and ATX form factors. Other form factors can be used, although this may impact the PCI card capacity. Mounting Rails Rack mount rails allow you to mount the chassis in a rack.
The rails feature snap-in installation and quick release, and support modern square hole racks. Round hole rack are supported with a conversion kit. 1-2