Chapter 4: Chassis Setup and Maintenance 4. Tie off any excess fan cable inside the fan cage. Insert the holes on the base of the external fan cage onto the posts of the external fan bracket, with the fan cage at a slight angle as shown below. Guide the fan cable through the cage outet. Cage Outlet for Fan Cable Figure 4-21. External Fan Cage 5. Bring the external fan cage to an upright position against the rear of the chassis and secure it with two screws as illustrated. Open the breakable cover next to the fan and pass the fan connector through the opening. Figure 4-22.
Securing the External Fan Replacing an Existing External System Fan An external fan may be replaced without powering down the system. 1. Press the latch on the top of the fan. 2. Pull the fan away from the rear of the fan cage at a slight angle and lift the posts on the base of the fan out of the holes in the fan cage. 3. Remove the fan power cables. Figure 4-23. Removing the External Fan 4-19