Chapter 4: System Interface 4-4 Drive Carrier LEDs The SCF424 chassis which support hot-swappable 2.5" and 3.5" SAS/SATA drives include the following LED indicators. SAS/SATA Drives Each SAS/SATA drive carrier has two LEDs. Blue: Each Serial ATA drive carrier has a blue LED. When illuminated, this blue LED (on the front of the SATA drive carrier) indicates drive activity. A connection to the SATA backplane enables this LED to blink on and off when that particular drive is being accessed. Red: The red LED to indicate an SAS/SATA drive failure. If one of the SAS/ SATA drives fail, you should be notified by your system management software. SCSI Drives This chassis does not support SCSI drives.
4-5