Series Introduction SD700 series servo drives are mainly used for the occasion of high speed, high frequency and high positioning accuracy. The servo unit can maximize the performance of the machine in the shortest time, which can improve the production efficiency. SD700 servo drive not only support PROFINET, EtherCAT,MECHATROLINK-II,MECHATROLINK-III,CANopen,RS-485 and other field bus in the market, but also has a full closed loop, electronic CAM, flying shear, gantry synchronization and other non-standard application functions, through USB can be connected to the PC for debugging, convenient and fast.
10 SD700 Series Servo Technical Manual Notice The illustrations in this manual are representative examples or conceptual diagrams. It may be different from the actual wiring, circuits and physical objects. In order to illustrate the detailed parts of the product, the product illustrations in this manual are depicted without the outer cover or safety protection body. When using the product, be sure to install the cover or safety protection body in its original position before using it. If you need to obtain a new copy of this manual due to damage or loss, please contact our agent or the nearest branch office listed on the back cover.
Please inform us of the information number of this manual when contacting us. This manual may be changed from time to time due to product improvements, changes in specifications, or to improve the convenience of using this manual. After the change, the data number of this manual will be updated and issued as a new version. We do not guarantee the quality of products that have been modified by the customer. We are not responsible for any injury or damage caused by the modification of the product.