VEICHI — SD700 User Manual 20230516

Pn864 function code definition Function code A part function definition: Function code E part function definition: The maximum point buffer depth is 10-level. When the buffer depth is set to 0, the point buffer function is turned off. Note: In the point position control program, it is allowed to store up to 10 Pr instruction segments. Pr instruction segments exceeding 10 segments will overwrite the previously stored instruction segments. The stored Pr command segment can be a single-segment position command or a segment head command of a multi-segment position command. The previous Pr position command is a single-segment position command.

During the operation, the new position command is triggered through the PosTirg function, and the newly triggered position command is temporarily stored. After the previous Pr command is completed, the stored position command is read for operation. The schematic diagram of the single-segment storage function is shown in the figure below: Single-segment storage diagram As shown in the figure above, during the operation of a single position command, another Pr command is triggered. If the interrupt is not set for another Pr instruction, you need to wait for the current Pr instruction to complete before executing.

From the triggering to the execution of the second Pr instruction, the second Pr instruction is temporarily stored in the position instruction storage Buffer. 9.4.4 Multi-segment Storage Function When the previous Pr command is a multi-segment Pr command, if a new position command is inserted, and the newly inserted position command is not set to interrupt, it will be temporarily stored. 218 SD700 Series Servo Technical Manual A part Function 0~9 Point buffer depth E part Function 0 Jogging is invalid 1 Forward jog 2 Reverse jog