11 Monitoring Parameters 258 SD700 Series Servo Technical Manual Monitoring Monitoring name Range Unit Communication code address Un000 Motor rotation speed 0x80000000~0x7fffffff rpm 0xE000 Display the actual speed of the servo motor. Un001 Speed command 0x80000000~0x7fffffff rpm 0xE001 Display the current speed command of the servo motor. Note: When it is not enabled, this value shows the analog speed (corresponding to V-REF). Un002 Internal torque command 0x80000000~0x7fffffff % 0xE002 Display current actual torque command with servo motor rated torque as 100%.
Un003 Rotor pulse position relative to the Z axis 0x80000000~0x7fffffff pulse 0xE003 Shows the mechanical absolute position of the motor within one revolution of the encoder. Un004 Electrical angle 0x80000000~0x7fffffff ° 0xE004 Displays the electrical angle of the current position of the servo motor rotor. Un005 Speed of input pulse command 0x80000000~0x7fffffff rpm 0xE005 Display input position pulse command speed. Un006 Counter of input command pulse 0x80000000~0x7fffffff Command Unit 0xE006 Displays the number of command pulses received by the servo motor.
Un007 Counter of feedback pulse 0x80000000~0x7fffffff Command Unit 0xE007 Displays cumulative pulses fed back from the servo motor encoder. Un008 Counter of feedback pulse 1 0x80000000~0x7fffffff Encoder pulse unit 0xE008 Displays cumulative pulses fed back from the servo motor encoder. Un009 Position deviation 0x80000000~0x7fffffff Command Unit 0xE009 Display the difference between the command pulse number of the upper device and the servo motor movement amount. Un010 Absolute encoder single-turn value 0x80000000~0x7FFFFFFF Encoder unit 0xE010 Display the absolute position value of one-turn of the absolute encoder.
Un011 Absolute encoder multi-turn value 0x80000000~0x7FFFFFFF - 0xE011 Displays the number of multi-turn encoder turns value when the multi-turn encoder is used. After the multi-turn encoder reset operation is performed, the value is 0. Un012 External encoder feedback pulse counter 0x80000000~0x7FFFFFFF External encoder unit 0xE012 Display external encoder feedback pulse counter when external grating encoder is connected. Un021 Motor absolute position 0x80000000~0x7FFFFFFF command unit 0xE021 Display the absolute position of the motor, the unit is the command unit.