VEICHI — SD700 User Manual 20230516

260 SD700 Series Servo Technical Manual LED Input pin number 1 CN1-31/32 2 CN1-25/26 3 CN1-27/28 4 CN1-29/30 Un102 T-REF monitoring 0~0xFFFF % 0xE102 Corresponds to the T-REF input voltage, according to the analog torque command gain. Un103 V-REF monitoring 0~0xFFFF rpm 0xE103 Corresponds to the T-REF input voltage, according to the analog torque command gain.

Un104 Pulse command input frequency 0~0xFFFFFFFF Hz 0xE104 Un108 External input command pulse counter 0~0xFFFFFFFF Command Unit 0xE108 Un110 Integrated monitoring of internal signal status 0~0xFFFFFFFF - 0xE110 Un120 Integrated monitoring of internal input signal status 0~0xFFFFFFFF - 0xE120 Un130 Integrated monitoring of internal output signal 0~0xFFFFFFFF - 0xE130 Un140 Main circuit bus voltage 0~0xFFFF V 0xE140 Un141 Effective current feedback 0~0xFFFF 0.01A 0xE141 Three-phase synthetic feedback current effective value.

Un14B D-axis current command monitoring 0~0xFFFF % 0xE14B Un220 Torque command voltage (uncorrected) 0~0xFFFF mv 0xE220 Un221 Torque command voltage (after correction) 0~0xFFFF mv 0xE221 Un222 Speed command voltage (uncorrected) 0~0xFFFF mv 0xE222 Un223 Speed command voltage (after correction) 0~0xFFFF mv 0xE223 Un300 Current alarm code 0~0xFFFF - 0xE300 Un301 Last alarm code 0~0xFFFF - 0xE301 Un302 Timestamp while alarm occurs 0~0xFFFFFFFF 100ms 0xE302 Un303 Motor speed while alarm occurs 0~0xFFFF rpm 0xE303 Un304 Speed command while alarm occurs 0~0xFFFF rpm 0xE304 Un305 Internal torque command while alarm occurs 0~0xFFFF % 0xE305 Un306 Input command pulse speed while alarm occurs 0~0xFFFF rpm 0xE306 Un307 Deviation counters (position deviation)while alarm occurs 0~0xFFFFFFFF pulse 0xE307 Un308 DC bus voltage while alarm occurs 0~0xFFFF V 0xE308 LED Input pin number