b). Read all: Left-click on [Read] -> Select [All] to read all parameters and the pop-up dialog box will display the progress of the read function code in the form of a progress bar; as shown in the following figure: (6) Function code write/import Function code writing can be individually written. Step: a). write individually: select a function code, click on the column corresponding to the current value, click twice in succession, it may enter the editing state, enter the value then click on Enter, the system will automatically send a write command, or directly click [Write] on the toolbar after editing to finish writing the parameters. b). Steps to import in batches:
Click [Import] → [Select File] -> Click [Import], as shown in the following figure: 277 SD700 Series Servo Technical Manual