VEICHI — SD700 User Manual 20230516

Steps: a). In the interface of digital oscilloscope, remove the unnecessary waveform options, and the corresponding Y-axis curve will be automatically hidden in the graphics; for example, let the position instruction speed waveform be hidden, remove the check signal in the corresponding options as shown in the following figure. Curve zooms in/out Steps: a). Zoom in the area: Press the left mouse button and pull a zone from the upper left corner to the lower right corner, this area can be enlarged. b). Zoom out the area: Press the left mouse button and pull a zone from the lower right corner to the upper left corner, this area can be reduced. c). Zoom in curve X/Y: click on the button . d).

Zoom out curve X/Y: click on the button . e). Zoom in curve X: Click on the button to decrease the time in the options. f). Zoom out curve X: Click on the button to increase the time in the options. g). Zoom in curve Y: Click on the gain option of the corresponding curve to decrease the gain value. As shown in the figure below, you can adjust the gain of six Y curves. h). Zoom out curve Y: Click on the gain option of the corresponding curve to increase the gain value. As shown below: 295 SD700 Series Servo Technical Manual