MOUNT VERTICALLY {VARIOUS SPACINGS) MOUNT ON TOP \ OF SHELF BRACKET MOUNT DIRECTLY TO CORNER BRACKET MOUNT TO BOTTOM OF SHELFBRACKET THREE DIMENSIONAL CARVING When Ca_'ving three dimensional objects bear in mind that the capacities of your Recreator will limit you to an object not more than 8 inches in diameter and 8 inches taif. Measure the master to make sure it is within these limits before proceeding. 8 _ _=,. 8 _ , i Unless a-single block of wood large enough to contain the entire carving is: available, it;will be necessary to laminate several: pieces of 3/4 inch stock to the size required. ' .
= An interesting effect can be achieVed by laminating woods of contrasting colors such as redwood and white pine, For your initial attempts, however, an all redwood or pine workpiece isrecommended. , ,,,,i After the laminated workpiece has dried, remove any excess stock with a sabre saw. band saw or coping saw. Try to remove as much excess stock as possible but make sure the workpiece remains larger than the silhouette of the master. \ BROWN KRAFT PAPER "16