assembly THE FOLLOWING TOOLS WiLL BE REQUIRED FOR ASSEMBLY AND ALIGNMENT Pliers 1/8" 5/32" Socket head setscrew wrenches 9/16" wrench 5/8" wrench 7/16" wrench 3/8" wrench (supplied) Combination Square Tape measure Screw driver -- medium I. BASE ASSEMBLY Working in a welt lit, clean area is always a plus. It's also a good idea to place all hardware (nuts and bolts) in a bowl or other suitable container so they're easily accessible and don't get scattered. FOR THIS FIRST OPERATION YOU'LL NEED: C ITEM DESCRIPTION QTY. A Shelf Brackets ........................ 6 B Corner Brackets ....................... 2 C Track Brackets ........................ 2 D Pan Head Screws, 1/4-20 x 1-1/4" . .....
12 E Shelf Boards .......................... 3 F Pan Head Screws, 1/4-20 x 1/2" . ....... 8 G Hex Nuts, 1/4 x 20 ..................... 20 D 1-1/4"PAN j HEAD SCREW TRACK BRACKET NOTE: The base of your Router Recreator is made up of 2 Shelf Boards (front and rear), 2 Track Brackets (top), and 2 Corner Brackets (bottom) see illustration. © © Attach all Brackets to the Shelf Boards as shown using a 1-1/4 inch pan head screw. SHELF BRACKET Use a 1/2 inch pan head screw to attach the Track and Corner Brackets to the Shelf Brackets (see illustration). H1/2 ' PAN 1 EAD SCREW CORNER BRACKET