SERVICE AND ADJUSTMENTS TO ADJUST ATTACHMENT LIFT SPRING (See Fig. 31) ADJUSTMENT' SPRING BUSHING While holding spring bushing withwrench, loosen jam nut. Turn adjustment bolt crockwise to extend spring and reduce lift effort for heavier attachments., ° Turn adjustment bolt counterclockwise for lighter' at- tachments° Retighten jam nut against spring bushing. IMPORTANT: DO NOT ADJUST FORMAXIMUM SPRING TENSION WHEN USING LIGHT ATTACHMENTS SUCH AS A MOWER.. ADJUST LIFT LEVER SPRING TO AID IN LIFTING ATTACHMENT_ DO NOTOVERPOWER SPRING. WHEN REMOVING ATTACHMENT, ALWAYS ADJUST SPRING TENSION TO ITS LOWEST POSITION_ ў JAM NUT ATTACHMENT LIFT SPRING °/ FIG.
31 TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 32) Raise hood,, Unsnap headlight wire connector_ Stand in frontoftractor_ Grasp hoodat sides,tilt toward engine and lift off of tractor., To replace, reverse above procedure. "_" HEADLIGHT / WIRE "_ CONNECTOR FIG. 32 24