CHECKTIREPRESSURE Thetiresonyourtractorwereovednflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. Reduce tire pressure to PSI shown in =PRODUCT SPECIFICATIONS" on /CHECKLIST PLEASE REVIEW THE FOLLOWING CHECKLIST: All assembly instructions have been completed. ,/ No remaining loose parts in carton. J Battery is propedy prepared and charged. (Minimum 1 hour at 6 amps). page 5 of this manual. CHECK DECK LEVELNESS ,/ Seat is adjusted comfortably and tightened securely. All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory). For best cutting results, mower housing should be properly leveled.
See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. CHECK FOR PROPER POSITION OF ALL BELTS ,/ Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. ('13res must be propedy inflated for leveling). ,/ Check mower and drive belts. Be sure See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are rout- ed correctly. they are routed properly around pulleys and inside all belt keepers. CHECK BRAKE SYSTEM ,/ Check wiring. See that all connections are still secure and wires are properly clamped.
After you leam how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual. WHILE LEARNING HOWTO USE YOUR TRACTOR, PAY EXTRAATI'ENTION TO THE FOLLOWING IMPORTANT ITEMS: Engine oil is at proper level. / Fuel tank is filled with fresh, clean, regular unleaded gasoline. ,I Become familiar with all controls - their location and function. Operate them before you start the engine. ,/ Be sure brake system is in safe operating condition. 11