....... i OPE 0 HOW TO USE YOUR LAWN MOWER ENGINE SPEED CONTROL (See Fig. 5) The engine speed is controlled by a lever (red knob) located on the side of the engine. Fast (_) position is for starting the engine, normal cutting, and better grass bagging. Slow (,_!) position is for light cutting, trimming and fuel economy. ENGINE ZONE CONTROL ENGINE SPEED CONTROL LEVER CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not un- der any circumstances attempt to de- feat the function of the operator control. The blade turns when the engine is running. FIG.
5 LOWER WHEELS FOR HIGH CUT RAISE WHEELS FOR LOW CUT . Your lawn mower is equipped with an operator pres- ence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the fawn mower. TO ADJUST CUTTING HEIGHT (See Fig. 6) Raise wheels for low cut and lower wheels for high cut. . Wheels are set in low cut for shipping. Adjust cutting height to suit your requirements. Medium position is best for most lawns. To change cutting height, squeeze adjuster lever to- ward wheel. Move wheel up or down to suit your requirements, Be sure al] wheels are in the same setting, FIG. 6 8