OPERATION REQUIREMENTS Safety Instructions Features Operation Requirements Installation Instructions Washer Use Washer Care Troubleshooting Electrical Requirements WARNING To redue the risk of fire, , electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before operating this appliance. Use a 120 Volt, 60Hz, 15 amp fuse or circuit breaker. We recommend an individual branch circuit that serves only your washer. WARNING Never use an extension cord. Electrical grounding is required for your washer. You must ground your washer. In the event of a malfunction or breakdown, grounding reduces the risk of electric shock by providing a path of least resitance for the electric current.
You washer is equipped with a power cord with a three-pronged grounding plug for use in a correctly installed and grounded outlet. The outlet must be correctly installed and grounded in accordance with all local codes and ordinances. WARNING You are responsible for providing adequate electrical services for your washer. An incorrectly connected equipment-grounding conductor can increase the risk of electrical shock. Check with a qualified electrician or serviceman if you are not sure whether your washer is grounded correctly. Do not modify the power cord plug that came with your washer. lf the plug does not fit the outlet, have the correct type outlet installed by a qualified electrician.
To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.70 Latest Revision and local codes and ordinances. Never connect the ground wire to plastic plumbing lines, gas lines or hot water pipes. 13