1 Figure 6-21 Drum drawer (top drawer) assembly removal and replacement (1 of 3) 11 Slide a small flat-blade screwdriver under the black plastic retaining clips on the drawer guide rails. Then lift the tab and pull the drawer out slightly to clear the latch that holds the plastic retaining clips in place (see Figure 6-22 and Figure 6-23). 12 Pull the drum drawer (top drawer) straight out and away from the printer. Reinstallation tip When replacing the drum drawer (top drawer) assembly, make sure the cable is lying flat in the cable guide. 164 Removal and replacement C7085-90921