Connecting to a 10Base2 network (J3111A only) 1 1 Attach one section of your ThinLAN cable to the BNC “T” connector. 2 Attach another ThinLAN cable section ( [1] ) or a 50-ohm terminator ( [2] ) to the other side of the BNC “T” connector. If you are attaching the printer to the end of your network, you must connect a 50-ohm terminator.) 3 Connect the BNC “T” connector to the BNC port on the HP JetDirect print server. BNC port C7085-90921 Chapter 3 Installation and configuration 65 2 3 Note The HP JetDirect J3111A print server supports one Ethernet cable connection at a time.