Top Cover Open the Top Cover and remove the Toner Cartridge. CAUTION To prevent damage to the Toner Cartridge, do not expose it to light for more than a few minutes. To remove the Top Cover, you must remove the Rear Right Side Cover (page 6-6), the Toner Cartridge Drive Arm (page 6-9), the Control Panel Overlay (below) and the Control Panel (page 6-8). Control Panel Overlay Figure 6-3 Removing the Control Panel Overlay 1 Using a flat-blade screwdriver, gently pry upward on the right side of the Control Panel Overlay to loosen it. 2 Remove the Control Panel Overlay from the tabs on the left and lift it upward, off of the printer. Removing Covers 6-7