Formatter Cage Assembly For accessing DIMMs EIO accessory Figure 6-16 Removing the Formatter Cage Assembly 1 Print a Configuration Page. The information is necessary to reconfigure the printer after you replace the Formatter. 2 Remove the rear right side cover (page 6-6). The Formatter Cage Assembly is directly underneath. 3 Remove the captive screw and open the DIMM access door to see if any DIMMs are installed. Remove and transfer any DIMMs or EIO accessories if you replace the Formatter. 4 Remove the 5 screws around the Formatter cage. 5 Slide the Formatter toward the rear of the printer and remove it.
Note Using the Configuration Page you printed in step 1 above, reconfigure the printer after replacing the Formatter. Be sure to reset the printer’s page count (page 3-33). 6-20 Removing and Replacing Parts