Laser Scanner Shutter interlock and plate Figure 6-20 Removing the Laser Scanner 1 Remove the Top Cover (page 6-7). The Laser Scanner is on the top of the printer, tilted toward the rear, and has a yellow label on it. 2 Unplug the 3 connectors as shown. 3 Remove the 4 black screws around the edges of the Laser Scanner. Do not remove the two screws on the cover of the Laser Scanner. 4 Lift the Laser Scanner straight up. Hint When you replace the Laser Scanner be sure the black shutter interlock is resting on top of the silver shutter plate. Removing Assemblies 6-23