Tray 1 Pickup Assembly 1 Remove the covers (starting on page 6-6): Top Cover, Left Side Cover, Front Right Side Cover, and Tray 1. The Tray 1 Pickup Assembly is on the front of the printer. Envelope feeder gear cover Step 4b Envelope feeder connector cover Step 4a Figure 6-26 Removing the Envelope Feeder Gear Cover 2 Flip down or remove the Envelope Feeder Connector Cover. 3 Remove the Envelope Entrance Cover. 4 Remove the Envelope Feeder Gear Cover as follows: a Remove the black self-tapping screw at the bottom of the Envelope Feeder Gear Cover. b Remove the long screw (4.8 in/116 mm) on the right side of the Tray 1 Pickup Assembly. Removing Assemblies 6-29