Table 7-6. Numerical Printer Messages (continued) Control Panel Message Event Log Message Explanation Recommended Action 20 INSUFFICIENT MEMORY alternates with PRESS GO TO CONTINUE The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. Press [Go] to print the transferred data (some data might be lost), then simplify the print job or install additional memory. 21 PAGE TOO COMPLEX alternates with PRESS GO TO CONTINUE The data (dense text, rules, raster or vector graphics) sent to the printer was too complex. Press [Go] to print the transferred data.
(Some data might be lost.) To print the job without losing data, from the Configuration Menu in the printer’s Control Panel, set PAGE PROTECT=ON , print the job, and then return PAGE PROTECT=AUTO . Do not leave PAGE PROTECT=ON ; it might degrade performance. If this message appears often, simplify the print job. 22 EIO X BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE Too much data was sent to the EIO card in the specified slot ( X ). Press [Go] to clear the message. (Data will be lost.) Troubleshooting the Printing System 7-31