Table 3-9. Printing Menu (continued) Item Values Explanation UNIT OF MEASURE= INCHES (110V printers) or MILLIMETERS (220V printers) INCHES MILLIMETERS This item appears only when CONFIGURE CUSTOM PAPER=YES . Select the unit of measurement for the custom paper size. This item appears only when CONFIGURE CUSTOM PAPER=YES . Select the dimension to be fed into the printer (short edge).
X DIMENSION= 8.5 INCHES (110V printers) or 216 MILLIMETERS (220V printers) 3.00 TO 8.5 INCHES (110V printers) or 76 to 216 MILLIMETERS (220V printers) Y DIMENSION= 14.0 INCHES (110V printers) or 356 MILLIMETERS (220V printers) 5.00 TO 14.0 INCHES (110V printers) or 127 to 356 MILLIMETERS (220V printers) This item appears only when CONFIGURE CUSTOM PAPER=YES . Select the other dimension (long edge). FORM= 60 LINES (110V printers) or 64 LINES (220V printers) 5 to 128 Sets vertical spacing from 5 to 128 lines for default paper size. Press [– Value +] once to change the setting by increments of 1, or hold down [– Value +] to scroll by increments of 10.
Determine the default orientation of print on the page. ORIENTATION= PORTRAIT PORTRAIT LANDSCAPE Note It is best to set the page orientation from the printer driver or software application. (Driver and software settings override Control Panel settings.) 3-16 Printer Operation