The battery life of the remote key is about one year. When the battery power is low, the instrument will display "low key battery power". Please follow the below steps to replace the battery ： 1. Place the remote key on a soft surface with the button side down. Illustration: remove the remote key battery 4. Using a small flat bladed tool, pry the battery up from the edge of the battery. 5. Insert a new battery (model: CR2032) with the "+" side facing upward. Avoid touching the battery surface. Finger marks may reduce the service life of the battery. Clean the battery surface before installation. Illustration ： Remove the mechanical key 2.
After pressing the release button, pull out the mechanical key. 6. Install the key rear cover and press it tightly. 7. Insert the mechanical key. 8. Operate the remote key button (such as unlocking the vehicle, locking the vehicle, opening the back door, etc.), and check and confirm that the remote key works normally. Danger The replaced battery is very small and may cause suffocation if swallowed by children. Please keep the battery out of the reach of children, otherwise it may cause serious injury or even death. Illustration: open the rear cover of the key 3. Use a small flat bladed tool to open the key rear housing.
Warning Please dispose of waste batteries according to local regulations. Incorrect disposal methods of waste batteries will damage the environment and endanger human health.