Gear ● Rotate the shift knob to the left or right to the first position and release it to switch to neutral. The neutral position allows the vehicle to move freely. ● P block into D block, the shifter needs to be rotated two squares to the right, and the brake pedal should be pressed at the same time when shifting, and the accelerator pedal should be in the released state. ● When the R block enters the D block, the shifter needs to be rotated two notches to the right. When shifting, the vehicle must not be speeding backward, and the brake pedal must be depressed at the same time, and the accelerator pedal must be in the released state.
Example ： Gear shift knob ● When N block is in D block, the shifter needs to be rotated one notch to the right. When shifting, if the vehicle is at a standstill, the brake pedal needs to be depressed and the accelerator pedal is in the released state. Please fasten your seat belts and keep the doors closed before shifting gears. When the vehicle is in the parking gear, the brake pedal must be depressed to switch the gear. Turn the shift knob to the left or right to change gears. ● When requesting to enter P gear, press the P gear button, and keep the vehicle at a standstill when shifting gears.
Notice • When the vehicle is at a high speed, keep pressing the P gear button to trigger the dynamic parking function (refer to page 84). If you try to switch to a gear that is prohibited by the current driving speed, you will hear a knocking sound and the gear will be not changed 。 To keep the vehicle in neutral at all times in order to maintain free movement (for example, using a transport vehicle to tow, etc.), please perform one of the following methods: ● Release the parking brake. ● Enable dragged mode (refer to page 146). ● P gear into R gear, you need to turn the shift knob to the left by two notches to the end.
When shifting gears, press and hold the brake pedal at the same time, and the accelerator pedal is in the released state. ● N gear into R gear, turn the shift knob one click to the left. When shifting, if the vehicle is at a standstill, the brake pedal must be depressed and the accelerator pedal in the released state. ● D gear into R gear, you need to turn the shift knob to the left by two notches to the end. When shifting gears, the vehicle needs to have no forward speed, and at the same time step on the brake pedal, and the accelerator pedal is in the released state.
● To shift P gear into N gear, you need to rotate the shifter one step to the left or right, and you need to depress the brake pedal when shifting gears. ● To shift R gear into N gear, turn the shift knob one click to the right. ● To shift D gear into N gear, turn the shift knob to the left by one click. illustrate