Wiper washing Picture indication: Rotate the switch on the lever, turn on/off the wiper Picture indication: Toggle the lever up and down to adjust the wiper position ● “2” Wiper blades work at high speed. ● “ON” The rear wiper automatically swings. ● “1” The wiper works at low speed. ● “OFF” The rear wiper turns off. ● “AUTO” The wiper automatically works when the sensor detects rain, and the speed is adjusted according to the amount of rain. The sensitivity of the automatic wiper can be adjusted in 5 levels through the sensitivity knob in the middle of the handle.
Notice • Before using the wiper, please remove the ice and snow from the windshield first, and make sure that the wiper blade is not frozen in a fixed position. • If there are lines or stains on the windshield, clean the windshield and wiper blades. If the problem is still not solved, replace the wiper blades with new ones. • Never operate the wiper blade when the windshield is dry. ● “OFF” Turn off the wiper . ● “MIST” The wiper sweeps once, and then the lever automatically returns to the original position. Picture indication: Rotate the wheel on the lever to adjust the wiper speed.