Energy recovery function: In the process of braking or coasting, the kinetic energy generated by the vehicle can be converted into electrical energy and stored in the power battery to increase the vehicle's cruising range. When the vehicle is moving and the driver's foot is off the accelerator pedal, the activation of the energy recovery function will reduce the speed and transfer the recovered energy to the power battery. The instantaneous power meter of the drive system on the instrument displays the energy obtained through energy recovery braking in real time.
The amount of energy recovered through the energy recovery function depends on the current power state of the power battery and the set energy recovery state. 1 2 3 4 5 3 Slightly higher than the normal energy recovery intensity. When you release the accelerator pedal, the energy recovery will be performed at a slightly higher energy recovery intensity. Therefore, the deceleration is greater and the taxiing distance of the vehicle will be significantly reduced 6 7 4 The strong energy recovery mode can only be selected on extended-range models. After setting, it will provide a significantly higher energy recovery intensity when you release the accelerator pedal.
The vehicle slows down very fast, thereby reducing your use of the brake pedal. Frequency, and at the same time add more energy to the power battery. Picture indication : Settings> Driving (Different configuration functions are different, please refer to the actual car) 8 1 There is no energy recovery during coasting. When you release the accelerator pedal, the vehicle will coast freely. 9 2 Normal energy recovery intensity, when you release the accelerator pedal, the energy recovery will be performed at the normal energy recovery intensity, so the deceleration is not large, and the vehicle's sliding distance and free sliding are slightly reduced. 10 11 Intelligent driving assistance 81