counting pulses applied to the device inputs; conversion of the value from the counter into real physical value; comparing signal value to the setpoint before displaying; generation of signals for controlling the outputs according to a specified algorithm. Control unit includes buttons for entering parameters of the device. Display unit displays the measurement results or operating parameters on the indicators and shows the counter status using LEDs. Internal power supply converts the supply voltage for all units of the device and generates a signal indicating the loss of supply voltage.
6.2 Control and indication Elements of indication and control are located on the front panel of the device (see Figures 6.2 and 6.3 ): • seven-segment six-digit digital indicator; • five LEDs; • four/five buttons (depending on the type of housing). 28