To enter (or exit) the Setup mode, press and hold button for at least 2 seconds. While editing, if no button is pressed within 2 min., device automatically returns to parameter view mode. When device enters Setup for the first time, indicator shows PASS . Enter a new 4-digit password (default is 0000 ), save it and memorise. This password is further required for changing the device settings and for restoring factory settings ( dEFAUL ). NOTICE If you forgot your password, Setup mode can be entered with password 1098 . Structure of the device settings menu and sequence of pressing the buttons for setup is shown in Figure 7.1 . 34