1 Purpose and Function The Device is a universal counter that can be used for a wide range of automation tasks. It is designed to count the number of pulses coming to its inputs in direct and opposite direction and to convert further this number into a physical value (using multiplication by given multiplier). The device allows to perform the following functions: • count-up pulses from the connected sensors; converting the number of pulses into real units of measurement; powering sensors from the built-in 24 V DC power source; load control by two built-in output; saving counting results when power is turned off.
2 Specifications 2.1 Specifications Main technical specification of the device is given in Table 2.1 . Table 2.1 – Device features 7 Item Value Power supply AC: • supply voltage • frequency 90…264 V (nominal values – 110, 220 or 240 V) 47…63 Hz (nominal values – 50 and 60 Hz) DC: 20…34 V (nominal value – 24 V) Maximum power consumption max. 5 VA